J355 HA M50 EFO Class K12 Crash-Rated Hydraulic Automatic Retractable Maximum Security Crash Bollard (Painted Steel) - FAAC 116352

Details

J355 HA M50 EFO Class K12 Crash-Rated Hydraulic Automatic Retractable Maximum Security Crash Bollard (Painted Steel) - FAAC 116352

Please Note: The M50 Bollard Series By FAAC Has Been Discontinued and Replaced By The FAAC JS80 Bollard Series.

The J355 HA M50 EFO Crash Rated Automatic Retractable Security Bollard is designed for the protection of sensitive areas such as airports, embassies, consulates, banks, ports and more. Expertly designed and manufactured by FAAC, this special bollard features EFO, or Emergency Fast Operation, for very fast rise times. In the event of an emergency, this bollard can rise in just 2 seconds, compared to the standard version that rises in 6 seconds.

This bollard has been tested according to PAS 68:2013 and IWA 14-1:2013 regulations, obtaining certification for the highest class of penetration possible. Classification M50 indicates that the J355 bollard is able to stop a 15,000 lb. truck traveling at 50 mph with just 39" of total penetration (P1).

*Note: A foundation pit is necessary for the installation and operation of this bollard. Foundation Pit is sold separately.

Features:

• Class M50, K12
• Certified according to Standard PAS 68:2013 and IWA 14-1:2013
• PAS 68:2013 Crash Rated
• IWA 14-1:2013 Crash Rated
• Supplied with the main accessories already included
• Lock in the up position guaranteed even in the event of a power outage
• Extreme care in the selection of materials
• Steel cylinder, thickness 1.18 in (30 mm) with cataphoresis treatment and painted
• Powder paint dark grey metallised RAL 7021
• Flashing lights ring with central LED
• Hydraulic lock in the up position (in the event of a power outage)
• Watertight galvanized steel pit sheet with built-in drainage connection
• Emergency circuit for a faster rise time

Specifications:

• Drive: Hydraulic Operator
• Cylinder Height: 47.2 in (1,200mm)
• Cylinder Diameter: 14 in (355 mm)
• Cylinder Material: Steel S355JR EN10210 1.18 in (30mm) thickness
• Cylinder Surface Treatment: Cataphoresis and polyester powder painted RAL 7021 metallic dark grey
• Sleeve Material, Stainless Steel Version: AISI 316 satin finished
• Cylinder Head: Aluminium RAL 9006
• Rise Time: Approx. 6 sec
• Emergency Rise Time: Approx. 2 sec
• Descent Time (Standard): Approx. 3 sec
• Input Voltage: 230 Vac +6% - 10%; 50 / 60 Hz
• Power: 3,900 W
• Maximum Force: 2,025 lbf (9,000 N)
• Junction Box Protection Rating: IP 67
• Recommended Use: Security areas
• Reflecting Strip Height: 2.2 in (55 mm)
• Crash Resistance: 1852 KJoules
• Operating Ambient Temperature: 5°F to 131°F (-15 °C / +55 °C)
• Operating Ambient Temperature with Heater (optional): -40°F to 131°F (-40 °C / +55 °C)
• Connection Cable: Standard 16+1 conductor cables, minimum AWG16 (not supplied)

Optional Accessories:

• 355 HA Pit - FAAC 116110
• Pit Heater for J355 Bollards - FAAC 116202
• J355 Manual Release Kit - FAAC 116102
• JE275 Bollard Control Board - FAAC 116300

Specifications

CSI Specifications

Installation Instructions

CAD Drawing

Installation Gallery