FAAC Hydraulic Swing Gate Openers Guide

The 400 model of FAAC's hydraulic swing gate openers are high voltage and designed for residential, commercial, and industrial applications varying primarily on the model series. This swing gate opener system features quiet operation, self-lubrication, and a key-protected manual release. The 400 model is UL325 Class I, II, III, and IV compliant, requires an input voltage of 115 or 230 VAC, 230 W, and utilizes an asynchronous single-phase motor. Several series of 400-model hydraulic swing gate openers vary by maximum gate weight, length, usage, opening time, and hydraulic locking.

400 CBAC

400 CBAC means the gate opener hydraulically locks when in the open and closed positions. This series is recommended for 70 cycles per hour and is used with gates between 6 and 16 feet, up to 1300 lbs., allowing it a 90-degree opening time of about 18 seconds.

400 CBACR

400 CBACR means the gate opener hydraulically locks when in the open and closed positions and has a fast-opening time. This series is recommended for 80 cycles per hour and is used with gates between 6 and 12 feet, up to 900 lbs., allowing it a 90-degree opening time of about 12 seconds.

400 CBACEG

400 CBACEG means the gate opener hydraulically locks when in the open and closed positions and is recommended for use with longer gates. This series is recommended for 50 cycles per hour and is used with gates between 6 and 18 feet, up to 1500 lbs., allowing it a 90-degree opening time of about 18 seconds.

The 402 high voltage hydraulic swing gate opener's favorable trait is its compact design. The compact design is ideal for tight installation spaces in residential settings. This swing gate opener features quiet operation, self-lubrication, and hydraulic locking of the gate in the closed position, providing superior security. The 402 swing gate model has a maximum gate weight and length limit of 900 lbs. and 10 ft, allowing you to use this opener with various gate materials. This hydraulic gate opener system is recommended for residential use as it can run roughly 55 cycles per hour, has 90 degrees opening time of about 12 seconds, has an input voltage of 115VAC or 230VAC, power of 220 W, and an asynchronous single-phase motor.

The 422 is a high voltage hydraulic swing gate opener designed for residential and low-usage commercial applications. The versatility of this opener allows it to open and close gates of a maximum of 10 ft and 900 lbs. This opener features hydraulic locking of the gate in both the open and closed position, self-lubrication, and key-protected manual release. Some specifications of this swing gate opener are an input voltage of 115VAC or 230VAC, power of 230 W, an asynchronous single-phase motor, and a 90-degree opening of about 12 seconds, depending on gate length and weight. The 422 is highly recommended for residential and commercial applications as it can run about 55 cycles in an hour.

The S450H model is a low-voltage hydraulic swing gate opener system for residential applications. The hybrid technology of this gate opener system incorporates integrated encoders to control the operator's positioning, new multi-position bracket applications, and built-in mechanical stopping to provide maximum safety and security. This gate opener system utilizes the E024U control board, which features reverse-on-contact to optimize safety and a battery backup to ensure operation through power outages. This swing gate opener also features preinstalled hydraulic locking for the open and closed positions and is UL325 for Class I, II, III, and IV applications.

The S450H can handle gates between 12 and 14 feet, up to 1000 lbs. Opening and closing time depends on the gate length and weight; thus, the minimum time for a single leaf to open 90 degrees is 12 seconds. This hydraulic opener system requires an input voltage of 24 Volts DC and can operate continuously. The operating ambient temperature is -4 degrees to +131 degrees Fahrenheit, meaning you can use arctic or regular oil depending on the installation location and climate.

The S800 model is a low-voltage, in-ground hydraulic gate opener system. This gate opener's hybrid technology allows it to open gates of 13 to 16 feet and up to 1760 lbs. to 100 or 180 degrees. This model has an integrated high-resolution encoder for precise control, has opening and closing mechanical stopping, and an E024U control board that offers superior safety functions. The S800 model has a built-in battery backup and is UL:325 compliant for Class I, II, III, and IV applications. This hydraulic swing gate opener is 24VDC, 60 W, rated for continuous use. The S800 model is recommended for residential and commercial applications that prefer a wider gate opening angle and frequent use day or night.